Ion Edge countertop
The world's first ionisation-based purifier and ioniser. Sediment, carbon and ultra filtration stages ahead of the ion chamber — water that tastes like its source.
- Taste
- Pathogens
- Countertop
Authorized Alberta supplier of Zinc'd ion systems
Clean water without the
Clean water without the
chemistry set. Measured in parts per million.
We bring Zinc'd copper-silver-zinc ionisation to Alberta and pair it with locally sourced softening and filtration — because prairie water needs both. Every system is sized to your water test.
FreeWater test & assessment
No chlorineUV or ozone dependency
Full serviceDesign, install, maintain
Ion chamber · Gen IV
Dosing continuously
Cu
Copper0.3 – 0.4 ppm
Disrupts cellular respiration in bacteria and algae.
Ag
Silver0.03 – 0.04 ppm
Binds to microbial enzymes and halts reproduction. Residue-free.
Zn
Zinc0.5 – 0.7 ppm
Stabilises pH and neutralises biofilm — the element that holds the balance.
Zinc'd ion chambers release measured concentrations of all three, neutralising pathogens at the molecular level. Dosing is calibrated to your source and flow.
The science
Three anodes. One panel. Continuous protection.
Ionisation isn't a filter you replace every month. Three anodes sit inline with your existing plumbing and release copper, silver and zinc at controlled concentrations — no chlorine, UV or ozone dependency.
Three ionising anodes
Copper, silver and zinc anodes install inline with your existing filtration pipe — no rebuild of the plantroom required.
Wall-mounted control panel
A discreet panel monitors flow and modulates ion concentration in real time, so dosing tracks actual demand.
Continuous protection
Cu, Ag and Zn ions disinfect the water, prevent algae bloom and neutralise bacteria around the clock.
Residential
Alberta water is hard on everything it touches
Scale on the kettle, orange rings in the toilet, stiff laundry, a sulphur smell in the basement tap. Each is a different problem with a different fix — so we identify which you have before we quote anything.
Scale & soap scum
Hard water shortens the life of water heaters, dishwashers and fixtures, and leaves film on everything.
Rust staining
Iron and manganese stain sinks, tubs and laundry orange-brown and clog fixtures over time.
Rotten-egg odour
Hydrogen sulphide in well water produces a sharp smell and corrodes plumbing and fittings.
Taste you avoid
Chlorine, chloramine and dissolved solids push households to bottled water they shouldn't need to buy.
Home systems we design and install
Get yours specifiedPool ion systems
Custom-sized ionisation for backyard pools, plunges and hot tubs. Drastically less chlorine, and water that's gentle on skin, eyes, hair and finishes.
- −90% chlorine
- No by-products
- Any volume
Whole-home ion chambers
In-line systems integrated into existing plumbing to protect the full property — no visible hardware, no monthly cartridge cycle.
- Point of entry
- Invisible
- Low upkeep
Water softeners
Metered and twin-tank softeners sized to your hardness and household demand, so you use less salt and never run out mid-shower.
- Hardness
- Scale
- Appliance life
Iron & sulphur removal
Air-injection oxidising filters that pull iron, manganese and hydrogen sulphide out of well water without chemical feed.
- Staining
- Odour
- Acreage
Sediment & carbon filtration
Spin-down, sediment and carbon stages that catch sand, silt and chlorine before they reach anything downstream.
- Sediment
- Turbidity
- Protection
Drinking water
Potable purity, poured at source
From the kitchen tap to whole-building risers, Zinc'd drinking-water ion chambers meet potable standards without chemistry you can taste.
NSF 61Certified
< 0.05NTU turbidity
24/7Telemetry
Glass-clear taste
No chlorine aftertaste, no softener slip. Residue-free ionisation delivers water that tastes like its source.
Pathogen-grade safety
99.9% reduction of E. coli, Legionella and Pseudomonas at the point of service, verified continuously by in-line telemetry.
In-line and invisible
Ion chambers install within existing plumbing. Nothing on the counter, nothing to explain to guests.
Lower lifetime cost
No salt, no monthly cartridge cadence, no sacrificial media. One annual recertification visit.
Pools & hot tubs
Swim in something closer to spring
From backyard pools to hot tubs and cold plunges, Zinc'd ion systems deliver water that feels — and reads — like a natural mineral source.
−90%Chlorine use
PBTILab-certified
EN 15288Compliant
Up to 90% less chlorine
Cut the chemical load drastically. Pools feel like a freshwater spring rather than a swim cap.
Eco-friendly disinfection
No chemical by-products. Safe on skin, eyes, hair and pool finishes.
Lab-verified results
PBTI-certified independent testing on reduction of turbidity, biofilm and bacteria.
Smart control panel
Wall-mounted monitoring with real-time ion-level adjustment, sized from residential plunges to Olympic volumes.
Running cost · per month in operation · CAD
The maths of spring water
Pools running year-round — indoor, hot tubs and commercial installations — typically pay the system off in under two years on savings alone. A seasonal outdoor pool saves the same per month, over fewer months.
| Component | Traditional pool | With Zinc'd |
|---|---|---|
| Chlorine | $85 – $140 | $10 – $15 |
| Algaecide | $20 – $40 | $0 – $5 |
| Stabiliser | $15 – $30 | $0 – $5 |
| Labour (maintenance) | $485 – $835 | $70 – $140 |
| Liner wear & tear | $210 – $280 | $30 – $55 |
| Total per month | $815 – $1,325 | $110 – $220 |
Saves roughly $700 – $1,100 for every month the pool is in operation.
Zinc'd US residential averages, converted at 1 USD = 1.39 CAD. Alberta costs vary — we'll quote yours.
Commercial & industrial
Engineered for environments where water matters most
Every deployment is bespoke — sized to flow, calibrated to source, and commissioned on site. Untreated water costs you in scale, downtime, guest complaints and failed inspections.
Hotels & resorts
Spas & aquatic centres
Food & beverage
Bottling plants
Cooling towers
Municipal reservoirs
Work camps
Oil & gas
Agriculture
Healthcare & dental
Greenhouses
Car washes
Hotels, resorts & spas
From rooftop plunge pools to guestroom taps — a consistent standard of purity at every touchpoint, with no chlorine smell in the corridor.
- Pools
- Guest taps
- Legionella
Bottling & process water
Scalable ion reactors for bottling plants and production floors where product quality depends on what's in the water.
- Process
- Product quality
- Scalable
Cooling towers & HVAC
Ion dosing that controls biofilm and algae in tower loops, cutting chemical programs and the labour that goes with them.
- Biofouling
- Legionella
- Chemical spend
Reservoirs & potable supply
Reactors sized for municipal reservoirs and community systems, with continuous telemetry on dosing and flow.
- Reservoirs
- Telemetry
- Compliance
Camp & site potable water
Complete potable packages for camps, lodges and remote operations running off well or hauled water rather than municipal supply.
- Camps
- Well water
- Turnkey
Commercial softening & filtration
Commercial softeners, iron removal and multi-media filtration — the Alberta-specific groundwork that lets ionisation do its job.
- Hardness
- Iron
- High flow
Where our equipment comes from
Two supply lines, one standard
Ionisation solves disinfection. It doesn't soften water or pull iron out of a well. Alberta needs both, so we supply both.
Imported
Zinc'd ion systems
We're an authorized Alberta supplier for Zinc'd — proprietary copper-silver-zinc ion chambers for drinking water, pools, hospitality, industrial and municipal deployment.
Every system carries Zinc'd's certification and warranty support, and is commissioned to your source water rather than shipped as a stock configuration.
Local
Alberta-sourced treatment
Softeners, iron and sulphur removal, sediment and carbon filtration, media, housings and consumables — sourced in-province.
That means replacement parts arrive in days rather than months, and a service call never waits on customs.
How we work
Test first. Quote second.
We don't price a system before we know what's in your water. Every quote starts with a test and ends with equipment sized to the result — which is why you won't find price tags on this page.
Test your water
We collect a sample and analyse hardness, iron, sulphide, turbidity and bacteria — at your home or your site.
Design the system
We size pre-treatment and ion dosing to your results, your flow rate and your space, and explain what each stage does.
Install and commission
Full installation, plumbing tie-in, control panel setup and calibration, plus a walkthrough so you can run it confidently.
Recertify annually
Anode inspection, dosing recalibration and filtration service — residential visits and industrial contracts.
Service area
Across Alberta
Based in Alberta and serving homes, acreages, farms and facilities throughout the province. If you're outside these areas, ask — we travel for commercial and industrial projects.
- Edmonton
- Calgary
- Sherwood Park
- St. Albert
- Leduc
- Spruce Grove
- Fort Saskatchewan
- Red Deer
- Grande Prairie
- Fort McMurray
- Lethbridge
- Medicine Hat
- Camrose
- Lloydminster
- Cold Lake
- Surrounding counties
Request a quote
Tell us about your water
Send the form and we'll come back with next steps — usually a water test booking, then a written quote.
- 01No charge for the assessment or the quote.
- 02Pricing depends on your water, your volume and your flow rate, so we quote per project rather than list prices.
- 03You get a breakdown of what each stage does and what it costs to run.
Phone(587) 555-1234
Request sent
Thanks — we've got it. Expect a reply within one business day to arrange your water test.